How to Assemble Your Hauck Alpha+ Wooden High Chair

By Hatchery Cribs Singapore | Published: 2026-10-27

Category: How-to Guides

Follow this step-by-step guide to assemble your Hauck Alpha+ wooden high chair safely and correctly. Learn common mistakes and checkpoints for a sturdy, long-lasting setup.

Quick Answer

Assemble your Hauck Alpha+ wooden high chair by laying out all parts, attaching the legs and seat, securing the safety bar, and performing a final stability check. Follow the steps below to ensure a safe and sturdy setup.

Why Proper Assembly Matters

A correctly assembled high chair is essential for your baby's safety. The Hauck Alpha+ is designed to grow with your child, so a solid foundation ensures it remains stable through years of use, from bouncer attachment to toddler seating.

Rushing assembly or skipping the manual can lead to loose joints or misaligned parts, which may compromise the chair's stability. Taking a few extra minutes to double-check each step will give you peace of mind.

Tools and Preparation

Before you begin, clear a spacious area and lay out all components. The Hauck Alpha+ typically comes with the wooden frame, seat, safety bar, and necessary screws. You'll need a Phillips head screwdriver (often included) and a soft cloth to protect the wood surface.

Check that you have all parts against the manual's list. If anything is missing, contact Hatchery Cribs Singapore before starting assembly.

Step-by-Step Assembly Guide

Unbox and Inventory Parts: Remove all components from the box and lay them out on a soft surface. Cross-check each piece against the instruction manual to ensure nothing is missing or damaged. If any part is missing, contact Hatchery Cribs Singapore before proceeding.
Attach the Front Legs: Identify the two front legs (they may have pre-drilled holes). Align them with the seat base and insert the screws. Tighten them partially with the screwdriver, leaving some play for adjustment. Do not fully tighten yet; this allows for easier alignment of the rear legs.
Attach the Rear Legs: Position the rear legs and secure them to the seat base with the remaining screws. Ensure the legs are angled correctly—the rear legs should splay outward for stability. Check that the chair stands level on the floor before tightening fully.
Secure the Safety Bar: Slide the safety bar into the designated slots on the armrests. Press down until it clicks into place. The bar should move freely but not detach easily. Test the bar by pulling it gently to ensure it is locked securely.
Tighten All Screws: Using the screwdriver, tighten all screws firmly. Be careful not to overtighten, which could strip the wood or crack the frame. Recheck all screws after a few days of use, as wood can settle.
Perform a Stability Check: Place the chair on a flat surface and apply gentle pressure to the seat and backrest. Rock it slightly to ensure there is no wobble or squeak. If the chair feels unstable, recheck the leg alignment and screw tightness. Always perform this check before each use, especially after moving the chair.

Product Facts

Hauck Alpha+ Wooden High Chair: The Hauck Alpha+ is made of European beechwood from FSC® certified sources. This sustainable wood is durable and sturdy, but it's important to handle it gently during assembly to avoid scratches or dents.
Hauck Alpha+ Wooden High Chair